The PF6000 Automatic Raise Arm Parking Barriers are designed to offer long term reliability, efficient operation and durability. They incorporate an integral 3 phase inverter driven motor and gearbox drive providing a smooth consistent operation (single phase supply). They are controlled by a a Programmable Logic Controller, which can be programmed to suit any requirement. All versions of the PF6000 are CE approved and are 100% continuous duty cycle rated.

Whether your application is residential or commercial, the PF6000 has the ultimate flexibility to suit your needs. If a larger span is required, we are able to offer a heavy duty version capable of raising and lowering a pole length of up to 9 metres. The design is the result of years of experience, taking the latest technology and coupling it with tried and tested methods. The result, a superior product giving long service life and peace of mind.

PFTariffmaster Attendants Console

The PF Tarrifmaster time-based parking management system provides a simple and cost-effective way of managing car parking access and control-ling access validity periods without
the need for expensive cabling between components. The system uses magnetic stripe cards to hold access rights and validity time data. Each Entry Station provides information about visitor initial arrival times, and cards issued at the attendant’s console strictly control customers’ access rights to car parks and facilities as well as the final exit time.

The Tariffmaster attendant’s console reads barcode entry tickets, calculates the fees payable based on preprogrammed tariff details, encodes magnetic stripe access control cards and, if necessary, prints customer receipts and/or barcode exit tokens.

The console may also be connected to a PC to enable transaction records to be analysed and to provide additional tariff management features.

PFTariffmaster Entry Station

The Tariffmaster entry station is designed to be used primarily, but not exclusively, as part of the Tariffmaster Parking System as a means of recording the date and time that a vehicle enters a car park. Located at the entrance of the car park, it issues tickets to visitors as they arrive. Each ticket is printed with a barcode containing a serial number and the date and time at which the ticket is issued. The action of taking the ticket triggers an ‘open’ signal to the entry barrier.

The ticket will normally be required to be taken to an attendant’s station/reception desk where the arrival date and time will be used in conjunction with other data to calculate the parking fee.
If a barcode reader is fitted to the exit station, the ticket can be used to allow exit from the car park provided that it is used within the preset grace period.

A swipe card reader can be included to enable staff and long-term visitors to enter without requesting a ticket.

PFTariffmaster Exit Station

The PF Tariffmaster exit station is designed to be used as part of the Tariffmaster Parking System to prevent unauthorised vehicles leaving the car park or entering restricted areas. Located at the exit of the car park or the entrance to a restricted area, it validates pass cards and exit permits.

The main component of the station is a card capture reader that reads magnetic swipe cards issued to authorised staff, customers, guests, etc. If the card is valid for use at that check point and has not expired, the exit station controller will give an open signal to the associated barrier, turnstile, etc. The card may be captured on expiry and/or on the last day of validity. The station may also be programmed to capture lost or stolen cards. A swipe card reader option is available for stations that don’t need to capture cards.

A barcode reader may also be fitted at the exit station to read exit tickets. These tickets may be issued at the entry station or at the attendant’s station/reception desk. They are valid for single use at the exit station provided that they are used within the validity period. The exit station
controller checks the details within the barcode and sends an open signal to the associated barrier, turnstile, etc. when a valid ticket is identified.

PF6000Lux Automatic Raise Arm Barrier

The PF6000Lux Automatic Raise Arm Barrier is the perfect partner for the Tariffmaster System. However, for longer arm spans then the PF6000HD could be used. For areas where a higher security level is required or barrier may be prone to vandalism, Rising Bollards or Kerbs may be used with the Tariffmaster System.

• CE Approved (Conforms to BS6571)
• Spans up to 9 metres.
• Adjustable speed control varying from 4.0 to 10 seconds.
• Pole Diameter 100mm.
• 240 AC Single Phase Supply
• Heavy duty Gearbox and 3 phase motor drive (no springs required) allowing a smooth operation via the inverter, 100% Duty Cycle.
• Entry/Exit and Safety loop detector bases already built in.
• Programmable Logic Controller pre-programmed to suit all types of access control equipment.