|
|
|
|
PF9500A Automatic Bi-Folding Trackless Speed Gates
With Tubular, Palisade or Mesh infills
|
|
One of the latest products to be included in our range, the PF9500 Trackless Bi-Folding Speed Gates are proving to be a very successful addition. These gates are often preferred for Police, Fire & Ambulance Stations due to the fast action opening times of the gates. These gates are also very popular at high security installations such as Power Stations etc.
The PF9500 bi-folding trackless speed gates typically open at more than twice the speed of a traditional swinging gate of the same size which ensures a fast throughput of traffic while maintaining security of the site.
These products are the ideal solution where speed of opening and closing is essential or where space is at a premium. Leaves of these gates open to a full 90 degrees and when they are in the fully open position, the leaves do not encroach on the space between the posts.
|
|
|
For more information & pricing on these products, please call our sales team on 01827 870250 |
|
|
|
|
The PF9500 utilises a PLC controlled, inverter driven, 3 phase motor, worm and wheel gearbox with a direct-drive shaft connected to the gate leaf, which ensures a smooth and positive movement. PF9500 speed gates are rated for 100% duty cycle i.e. continuous operation.
The gates are manufactured using a RHS steel frame and CHS tubular steel infills.
A wide range of alternate infills are available to suit customers requirements and to match adjoining fencing design. Also available are spiked tops, warning lights and sirens if required.
The gates are supplied with a control cabinet which houses the PLC control panel.
The PF9500 bi-folding trackless speed gates are compatible with most access control options, including keypad, proximity card, inductive loop, push button, remote control etc.
|
|
|
|
| SPECIFICATION |
CE a pproved |
| DIMENSIONS |
Single unit - max width 3.5m height, 3.0m, bi-parting pair - 7.0m height 3.0m |
| POWER REQUIREMENT |
Single phase 240Volt 50Hz 10 amp |
| DRIVE MOTOR |
3 phase motor and wormed gearbox |
| MAXIMUM SPAN |
8 Metres drive through |
| MAXIMUM HEIGHT |
3.0 Metres |
| OPERATION TIME |
3 - 6 seconds (dependant on version), 100% duty cycle |
| FINISH |
Zinc plated and polyester powder coated |
|
|
|
|
INSTALLATION/BUILDING REQUIREMENTS
The PF9000 heavy-duty automatic sliding gate will be assembled and fully tested within the production factory, thus minimising the disruption on site. The gate will be delivered, ready to be lowered on to the pre-installed concrete plinths.
ACCESS CONTROL OPTIONS
Proximity Card Readers and Controllers, Keypads, Remote Control Transmitters, Push-Button control Raise/Stop/Lower, Intercom Systems, Token Acceptors, Counting Systems etc.
|
|
|
|
|
